User's Guide

User’s Guide — 17
USING THE SCHEDULECALC
Important Note!
Unless otherwise indicated, all sample
problems in this section assume the
ScheduleCalc is in its default state
(CAL Act: Act mode used for all exam-
ples). If not, use Cxto reset the
calculator.
Hours per Day
d
Used to enter or convert values to
Days. In C a l e n d e r mode, one day is
equivalent to 24 hours. In Work mode,
the hours per day can be set by
entering the value and pressing
sd. Pressing rdd i s p l a y s
the Hour per Weekday Setting (default
is 8).
Hours per Week
w
Used to enter or convert values to
Weeks. In C a l e n d a r mode, one week is
equivalent to 40 hours. In W o r k m o d e ,
the hours per week can be set by enter-
ing the value and pressing sw.
Pressing rwdisplays the Hours
per Week setting (default is 40).
Note: Changing the Preference settings
“
MON-SUN” modifies the “Hours per Day”
and “Hours per Week” values.