User`s guide

12 — KitchenCalc Pro—Master Chef’s Edition
USING THE TIMER(S)
Your calculator functions not only as a cooking unit converter and
recipe scaler, but also as a kitchen timer. In this model, there are
two audible count up/count down timers. See instructions below:
Using the Timer(s) — Press [Timer 1] or [Timer 2] to access the
built-in timer(s) or timer mode. The timer(s) can be set to count
down from 24 hours or less. The timer(s) will count up to 12 hours.
Count Up and Pause Timer — Once in timer mode, press [Timer
1] (or [Timer 2]) again to start counting up. Press it once more to
pause or freeze counting. Continue counting by pressing [Timer 1]
(or [Timer 2]).
Count Down and Stop Timer — To set the timer to count down,
follow this example: Set Timer 1 for a baking time of 1 hour, 30 min-
utes:
Description/Keystroke Display
Access timer: [Timer 1] 0:00:00
Enter 1 hour: 1 0:00:01
Enter 30 min.: 3 0 0:01:30
Enter 0’s for sec.: 0 0 1:30:00
Start Timer: [Timer 1] 1:30:00
Note: Press [Timer 1] again to pause counting down. Press it once more to continue.
Clear the Timer Display — Press [On/C]. Important Note: You
must first pause the timer if it’s counting, then press [On/C].
Exit the Timer — To clear and exit the timer mode (once the timer
is paused), press [On/C] twice. To exit the timer mode without clear-
ing the timer, press [On/C] only once, or press any non-timer key.
Note: If the timer is not cleared, the clock symbol will continue to blink on the display
to remind you the timer is running.
Using [Timer 2] — You can use [Timer 1] and [Timer 2] simultane-
ously and independently. They function identically, except Timer 2
has a slower beep.
(Cont’d)