User’s Guide

2 — Kitchencalc Pro
Changing the Portion Size ...................................................................13
Increasing Portion Size ..................................................................13
Decreasing Portion Size ................................................................14
CHANGING BOTH SERVING & PORTION SIZE..................................15
Decreasing Number of Servings and Increasing Portion Size ......15
USING THE TIMER ................................................................................16
APPENDIX .............................................................................................. 17
Errors ...................................................................................................17
Reset....................................................................................................17
Accuracy ..............................................................................................17
Repair and Return ...............................................................................18
Warranty ..............................................................................................18
GettinG started
Key definitions
Basic Function Keys

On/Clear Key — Turns power on. Pressing once clears
the display. Pressing twice clears all temporary values.

Off — Turns all power off. Clears all
non-permanent values.

Recall — Used with other keys to recall stored values and
settings (e.g.,
).
 – 
 and 
Keys used for entering numbers. The key saves
keystrokes when entering “00” values
(e.g.,
for “100”).


Arithmetic operation keys.
%
Percentage (%) — Used to find a given percent
of a number.

Convert — Converts to various units
(e.g., cooking units, temperature).

Memory (M+) — Adds displayed value to the standard,
cumulative Memory. To subtract from Memory, press a
value, then
.

Recall Memory — Displays the value saved in M+.

Memory Clear — Clears M+ and displays total.

Memory Clear (M-R/C) — Clears M+ without changing the
current display.

Change Sign (+/-) — Toggle displayed value between
negative and positive value.
(cont’d)
UG8305E-C.indd 2 4/28/2014 11:46:04 AM