Specifications

Introduction
MOTOROLA Motorola 56F8300 Hybrid Controller Family 7
• Analog to Digital Converter (ADC) Module
— Each high performance 12-bit ADC has two sample and hold circuits, enabling
simultaneous or sequential conversion at a rate of up to 1.2 µs per conversion
— ADCs can be used in single-ended or differential modes and have a sophisticated set of
unique features, including:
— self calibration
— high/low and zero crossing detection
— power saving modes
— ADCs can be triggered through variety of methods, including PWM synchronization
— ADC inputs have on-chip current protection circuitry, enabling their use in the harshest of
industrial applications
• Temperature Sensor
— Enables the measurement of the device’s operating temperature, which can be important
in safety-critical or harsh temperature environments
— Highly accurate sensor which can measure 1
°
C increments
— Each component is factory-calibrated for reliable operation
— The temperature sensing function can be configured to provide an interrupt when a certain
threshold is reached, thereby providing over-temperature detection with zero overhead
• FlexCAN
— This powerful second generation Controller Area Network (CAN) module is fully version
2.0 A/B compliant
— Features include:
— Time stamps based on a 16-bit, free-running timer
— Programable wake-up functionality with integrated low-pass filter
— 16 Transmit (Tx) / Receive (Rx) buffers
— This peripheral enables the reliable and flexible networking of processors and
intelligent devices at speeds up to 1Mbps
• Serial Communication Interface (SCI)
— This module operates as a full duplex Universal Asynchronous Receiver Transmitter
(UART)
— Fully interrupt-driven and programmable, providing a multitude of operating modes and
baud rates
• Serial Peripheral Interface (SPI)
— This synchronous serial interface is double-buffered
— Operates in wide variety of modes, rates, and bit lengths, enabling the glueless connection
to external peripherals and other processors at rates up to 30Mbps
• General Purpose Input/Output (GPIO)
— All digital pins for the on-board peripherals can also be individually assigned to be GPIO
and individually assigned a direction
— In addition to I/O capability, the GPIO can also generate interrupts
— Each GPIO has programmable pull-ups
— The GPIO also has a push-pull mode to efficiently implement a keypad interface
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...