Specifications

Crestron TPS-12G/15G/17G-QM-L Isys
®
G-Series Wall Mount Touchpanels
Hardware Hookup
Ventilation
The TPS-12G/15G/17G-QM-L should be used in a well-ventilated area. The venting
holes should not be obstructed under any circumstances.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications. Consider using
forced air ventilation and/or incrementing the spacing between units to reduce
overheating. Consideration must be given if installed in a closed or multi-unit rack
assembly since the operating ambient temperature of the environment may be greater
than the room ambient temperature. Contact with thermal insulating materials should
be avoided on all sides of the unit.
Connect the Device
Make the necessary connections as called out in the illustration on the following
page. Refer to “Network Wiring” on page 23 before attaching the 4-position terminal
block connector. Apply power after all connections have been made.
When making connections to the TPS-12G/15G/17G-QM-L, consider the following:
• Use Crestron power supplies for Crestron equipment.
• The included cable cannot be extended.
Operations Guide – DOC. 6356B Isys
®
G-Series Wall Mount Touchpanels: TPS-12G/15G/17G-QM-L • 51