Specifications

Crestron TPS-12G/15G/17G-QM-L Isys
®
G-Series Wall Mount Touchpanels
TPS-12G/15G/17G-QM-L Mounting Options (Continued)
PRE-
CONSTRUCTION
OPTION
POST-
CONSTRUCTION
OPTION
MODEL NUMBER
DOCUMENT
NUMBER
Trim Mount Kit
(Accessory)
-
TMK-12L
TMK-15L
TMK-17L
6360
6365
6370
Wall Mount Kit - Mud WMKM-12L 6359
- Wall Mount Kit - Trim
WMKT-12L
WMKT-15L
WMKT-17L
6360
6365
6370
NOTE: Pre-construction refers to framed walls prior to hanging drywall.
Post-construction refers to framed walls with drywall hung.
NOTE: Rack mounting kits (RMK-12L, RMK-15L and RMK-17L) are also
available for these touchpanels. Refer to the latest versions of the RMK-12L,
RMK-15L and RMK-17L Installation Guides (Docs. 6361, 6366 and 6402,
respectively).
Touchpanel Mounting
Tools Required: #2 Phillips tip screwdriver
1. If the cover plate is attached, use a #2 Phillips screwdriver to loosen and
remove the four screws and plate.
2. Connect all required cables to the touchpanel. Refer to “Hardware Hookup”
which starts on page 51 for details.
3. Insert the touchpanel (without its bezel) into the mounting option and align
the eight screw holes.
4. Insert and tighten the eight supplied screws (finger tight and then using a #2
Phillips screwdriver, tighten an additional 1/8-turn).
5. Cover the mounted unit with the bezel. Refer to the illustration on the
following page.
Operations Guide – DOC. 6356B Isys
®
G-Series Wall Mount Touchpanels: TPS-12G/15G/17G-QM-L • 49