Specifications

Isys
®
G-Series Wall Mount Touchpanels Crestron TPS-12G/15G/17G-QM-L
3. The TPS-17G-QM-L should be powered by the supply included with the touchpanel.
4. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
5. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
6. When loading VT Pro-e files or firmware through the RS-232 port of the control system, be sure that
the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, Toolbox may post the “Transfer
Failed” message.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
This section provides information on the connections, controls and indicators
available on your TPS-12G/15G/17G-QM-L.
TPS-12G-QM-L Physical View
10 • Isys
®
G-Series Wall Mount Touchpanels: TPS-12G/15G/17G-QM-L Operations Guide – DOC. 6356B