Specifications

Crestron MP2 & MP2E 2-Series Integrated AV Control System
Hardware Connections for the MP2 & MP2E
COM (A - B):
TO ANY RS-232,
-422 OR -485
DEVICE
COMPUTER:
TO SERIAL PORT
ON PC
CRESNET:
TO ANY
CRESNET
NETWORK
DEVICE*
INFRARED-
SERIAL OUTPUT
(A - D):
TO IRP2 OR
SERIAL DEVICES
RELAY OUTPUT
(1 - 4):
TO
CONTROLLABLE
DEVICES
FROM DEVICE OUTPUTS
- CONTACT CLOSURES
- RELAY CLOSURES
I/O (1 - 4):
TO CONTROLLABLE
DEVICES
24VDC, 2.0A:
AC POWER
PACK (24 VDC,
2A)*
VIDEO OUT:
TO
COMPOSITE
OR S-VIDEO
INPUTS
VIDEO IN:
FROM
COMPOSITE
OR S-VIDEO
OUTPUT(S)
AUDIO IN:
FROM
BALANCED/
UNBALANCED
STEREO
LINE-LEVEL
OUTPUTS
AUDIO IN:
FROM
UNBALANCED
STEREO
LINE-LEVEL
OUTPUTS
GROUND
LAN:
10/100 BASE-T
ETHERNET TO
LAN OR WEB
(MP2E ONLY)
AUDIO OUT:
TO BALANCED/
UNBALANCED
STEREO
LINE-LEVEL
INPUTS
IR IN:
FROM
CNXRMIRD
FOR RC-5
CODE
* The units can be powered through the NET network connector or by an AC power pack (PW-2410RU
included). If an alternate external power supply is to be used, Crestron recommends its CNPWS-75
External Power Supply or PW-2420RU Universal Power Pack or equivalent.
NOTE: Use care in wiring installations to avoid applying 24 VDC power to Cresnet
wiring from an AC power pack as well as from a system device that contains its own
power supply. Although this condition should not cause any damage, Crestron does
not recommend it. In those network configurations that require more power than can
be supplied by Crestron’s Power Control Unit alone, disconnect the +24VDC
Cresnet wire from those devices that will be powered by an AC power pack.
Video Connections
VIDEO IN
Four 75Ω video inputs are provided for four composite or two S-video inputs. A
video sensor on each input reports to the CPU. S-video must use port 1 (luma) and 2
(chroma) for the first input, and port 3 (luma) and 4 (chroma) for the second input.
Example: Signal connections for S-video source 1 and 2
Video In 1: luma (Y1) The brightness and contrast of video signal source 1
Video In 2: chroma (C1) The color portion of video signal source 1
Video In 3: luma (Y2) The brightness and contrast of video signal source 2
Video In 4: chroma (C2) The color portion of video signal source 2
Operations Guide – DOC. 6175A Series-2 Integrated AV Control System: MP2 & MP2E
• 17