Crestron MP2 & MP2E 2-Series Integrated AV Control System Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Contents 2-Series Integrated AV Control System: MP2 & MP2E 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications................................................................................................................
Crestron MP2 & MP2E 2-Series Integrated AV Control System 2-Series Integrated AV Control System: MP2 & MP2E Introduction Features and Functions • • • • • • • • • • • • • • • • • • 2-Series engine built on Motorola’s 32-bit 257 MIPS Coldfire® technology 36 MB of Internal Memory1 Integrated AV Switcher/Processor 4x2 high-bandwidth video switch with video signal detectors, expandable with the Crestron C2N-MMS 7x1 stereo audio switch 6-band graphic/parametric EQ Built-in volume, bass and treble controls Cre
2-Series Integrated AV Control System Crestron MP2 & MP2E 2-Series Engine At the heart of the MP2 & MP2E is the powerful 32-bit Freescale ColdFire® processor. Crestron's exclusive enhanced real-time operating system makes the MP2 & MP2E the fastest, most reliable control systems available. Cresnet® Cresnet is the communications backbone for many Crestron touchpanels, keypads, lighting controls and other devices.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Applications The following diagrams show an MP2E in a basic room master mode configuration with A/V switching and control and with an MMS multimedia switch. Example of a Basic Room Master Mode Configuration with A/V Switching and Control Operations Guide – DOC.
2-Series Integrated AV Control System Crestron MP2 & MP2E Example of a Basic Room Master Mode Configuration with MMS Multimedia Switch 4 • 2-Series Integrated AV Control System: MP2 & MP2E Operations Guide – DOC.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Internal Block Diagram The following diagram represents the AV switching abilities of the MP2 & MP2E. The diagram depicts the audio and video switching matrices and the equalization module available for the audio inputs. For more information refer to “Operation” on page 25. AV Internal Block Diagram of the MP2 & MP2E Operations Guide – DOC.
2-Series Integrated AV Control System Crestron MP2 & MP2E Specifications Specifications for the MP2 & MP2E are listed in the following table. MP2 & MP2E Specifications SPECIFICATION DETAILS Processor CPU 32-bit Freescale Coldfire Microprocessor Processing Speed 257 MIPS (Dhrystone 2.
Crestron MP2 & MP2E 2-Series Integrated AV Control System MP2 & MP2E Specifications (Continued) SPECIFICATION DETAILS Audio (Continued) GEQ Filter Gain ±12 dB, 0.1 dB steps from DMT; ±10 dB, 0.1 dB steps from SIMPL GEQ Filter Center Frequencies 63, 250, 1k, 4k, 10k Hz (5-band); 160, 600, 1k, 2.5k, 5k Hz (5-band speech); 250, 1k, 4k Hz (3-band) Frequency Response 20 Hz - 20 kHz +0/-0.5 dB THD + Noise <0.
2-Series Integrated AV Control System Crestron MP2 & MP2E Physical Description This section provides information on the connections, controls and indicators available on your MP2 & MP2E. MP2 Physical Views MP2E Physical Views 8 • 2-Series Integrated AV Control System: MP2 & MP2E Operations Guide – DOC.
Crestron MP2 & MP2E 2-Series Integrated AV Control System MP2 & MP2E Overall Dimensions 1 2 4 3 19.00 in (48.26 cm) 1.70 in (4.32 cm) 17.03 in (43.25 cm) 5 9.09 in (23.08 cm) 6 8 7 14 9 15 16 17 10 18 13 12 13 11 19 20 Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 1 PWR LED Indicates 24 Volts DC power supplied from Cresnet control network or included PW-2410RU power supply. 2 NET LED Indicates communication with Cresnet system.
2-Series Integrated AV Control System Crestron MP2 & MP2E Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 4 LAN LEDs3 LNK – Indicates when there is a connection to the rear panel LAN port. ACT – Indicates communication (activity) at the rear panel LAN port. 5 RESET BUTTONS 6 VIDEO IN (1 – 4) 3 2 4 VIDEO OUT (1 – 2) 7 (2) BNC female comprising (2) composite or (1) S-video outputs. Output impedance: 75 Ω.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS 12 LAN3, 8 DESCRIPTION (1) 8-wire RJ-45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status. Yellow LED indicates Ethernet activity.
2-Series Integrated AV Control System Crestron MP2 & MP2E Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 19 COMPUTER14 (1) DB9 female, RS-232 computer console port. Connector is used when programming with a PC. The port is modem compatible (modem and PC cables not included). Supports baud rate of up to 115 kB. Use with a standard DB9 straight through cable. Pins 1, 4, 6 and 9 are not used but may be connected. COMPUTER PIN # 20 24 VDC9 24VDC 2.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Industry Compliance As of the date of manufacture the MP2 & MP2E have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
2-Series Integrated AV Control System Crestron MP2 & MP2E Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Crestron MP2 & MP2E Rack Mounting 2-Series Integrated AV Control System The MP2 & MP2E can be mounted in a rack or stacked with other equipment. Two “ears” are provided with the MP2 & MP2E so that the unit can be rack mounted. These ears must be installed prior to mounting. Complete the following procedure to attach the ears to the unit. The only tool required is a #2 Phillips screwdriver.
2-Series Integrated AV Control System Connect the Device Crestron MP2 & MP2E 1. To utilize the bussing strip, determine the number of relays to be commoned for the equipment being installed. If less than four, the strip can be trimmed to size with a pair of scissors or wire snips. 2. Loosen the terminal block screws and insert the first leg of the bussing strip into the first common position of the terminal block. The strip engages the other common positions automatically. 3.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Hardware Connections for the MP2 & MP2E VIDEO OUT: TO COMPOSITE OR S-VIDEO INPUTS 24VDC, 2.
2-Series Integrated AV Control System Crestron MP2 & MP2E VIDEO OUT Two 75Ω video outputs are provided for two composite or one S-video output. For S-video, use port 1 for luma (Y) and port 2 for chroma (C). Audio Connections AUDIO IN Two balanced inputs utilizing five-position mini-connectors and five unbalanced inputs utilizing three-position mini-connectors are provided for audio input. Balanced audio inputs use (+) and (-) inputs and a separate shield (ground).
Crestron MP2 & MP2E 2-Series Integrated AV Control System +-G+- Unbalanced Audio Connections using a Five-Position Mini Connector Source 1 Source 2 + +-G+- Jumpers + Chan 2 AMP + + Chan 1 G Unbalanced Audio Connections using a Three-Position Mini Connector L Left + R + Right NOTE: Using the unbalanced configuration for the audio output reduces the total audio gain by 6 dB. Operations Guide – DOC.
2-Series Integrated AV Control System Crestron MP2 & MP2E Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Crestron MP2 & MP2E 2-Series Integrated AV Control System • To incorporate the MP2 or MP2E into the system, drag the MP2 or MP2E from the Control Systems folder of the Device Library and drop it in the System Views. Locating the MP2 & MP2E in the Device Library Programming Manager Programming Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.
2-Series Integrated AV Control System Crestron MP2 & MP2E NOTE: The SIMPL Windows symbol will allow any valid value. Programming the parametric equalizer through SIMPL Windows may override the Digital Media Tools settings. For example, if the 5-band graphic equalizer mode is specified in Digital Media Tools and the SIMPL Windows program then changes one of the graphic filters, the system reverts to full parametric mode.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication.
2-Series Integrated AV Control System Crestron MP2 & MP2E connectors. Alternatively, use a CAT5 crossover cable to connect the two LAN ports directly without using a hub or router. • Use the Address Book in the Crestron Toolbox to create an entry for the MP2E with the MP2E’s TCP/IP communication parameters. • Display the “System Info” window (click the MP2E entry. • Use the Crestron Toolbox to create the MP2E IP table. icon) and select the ⇒ Select Functions | IP Table Setup.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Operation Crestron 2-Series Control Systems are the brain of a complete integrated audio/visual or automation solution, serving as the central processor and I/O interface. Every audio, video and environmental element of the home, boardroom, classroom or command center becomes integrated and accessible through the control system.
2-Series Integrated AV Control System Crestron MP2 & MP2E Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. MP2 & MP2E Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Unexpected response from control system. Network devices are not communicating with the control system. Use Crestron Toolbox to poll the network.
Crestron MP2 & MP2E 2-Series Integrated AV Control System MP2 & MP2E Troubleshooting (Continued) TROUBLE A/V system device does not respond. POSSIBLE CAUSE(S) CORRECTIVE ACTION IRP2 or serial port not placed properly. Verify placement of IRP2 (hold phosphor card under IRP2 while pressing button) and tighten serial cables. Used wrong IR/serial port. Verify that proper IR or serial port is defined. Serial cable not wired correctly. Verify that serial cable is wired correctly for RS-232, 422 or 485.
2-Series Integrated AV Control System Crestron MP2 & MP2E System Monitor [v1.001 (0001)] 12-19-01 16:25:23 32MB RAM, 4MB FLASH CS> 7. At the Toolbox prompt, type erase and press Enter. The following text appears in Toobox. CS>erase ->25%->50%->75%->100% Done CS> NOTE: There are two methods for loading firmware through System Monitor (using Alt+O or using Alt+U). Because the first MP2 & MP2E firmware version 3.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Battery Replacement A Lithium battery is used to power the system clock within the MP2 & MP2E. Under normal conditions, it will last for approximately 10 years. In the event that the clock fails, only an authorized technician should replace it. Refer to caution statement below. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
2-Series Integrated AV Control System Add Hubs Crestron MP2 & MP2E For larger networks (i.e., greater than 28 network devices), it may become necessary to add a Cresnet Hub/Repeater (CNXHUB) to maintain signal quality throughout the network. Also, for networks with lengthy cable runs it may be necessary to add a Hub/Repeater after only 20 devices. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
2-Series Integrated AV Control System Crestron MP2 & MP2E If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron MP2 & MP2E 2-Series Integrated AV Control System Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
2-Series Integrated AV Control System Crestron MP2 & MP2E This page is intentionally left blank. 34 • 2-Series Integrated AV Control System: MP2 & MP2E Operations Guide – DOC.
Crestron MP2 & MP2E 2-Series Integrated AV Control System This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6175A (2008838) 08.06 Specifications subject to change without notice.
