Manual

5. The displayed units begin fl ashing, indicating that they
are ready to be changed. Press [UNITS] to scroll through
the available units.*
6. Use [MR]
4
to begin value entry mode. The selected digit
begins fl ashing, indicating that it is ready to be changed.
Use [MR]
4
to move through the digits.
7. Use [AREA]
5
or [PERIM]
6
to increase or decrease the
selected digit.
8. To store the Custom Scale, press [SET] or [SCALE]. To
confi rm the scale has been set, “Scl Set” is displayed for
one second. Stored Custom Scales display “SET” instead
of “OPEN” (e.g., 1 SET).
*In Imperial Mode, only the following units are available:
Feet-Inch, Feet and Inches. In Metric Mode, only the following
units are available: Meters, Centimeters and Millimeters.
(Cont’d)
26 — ULTRA SCALE MASTER
®