Owner's manual

16 — Scale Master
®
II – PC Interface
Clearing Values in Registers
Values stored in Length, Width and Height are semi- permanently
stored, meaning they will remain stored even after a [RESET], but will
clear if the SMII is turned off.
To clear values without turning the SMII off:
1. Clear stored length: press [RESET] and [LENGTH] together
2. Clear stored width: press [RESET] and [WIDTH] together
3. Clear stored height: press [RCL] [SET] then [RESET] and
[SQ/CU] together
6215UG-E-G 9/2/03 2:38 PM Page 16