User Manual

4) Press [Scale]. The appropriate an-
nunciator will begin flashing “FT-
IN“ for Imperial Mode, “MM” for
Metric Mode.
5) If you want to change the units of
measurement, press [M+]. You can
repeatedly press this key until you
reach the desired unit of measure-
ment. Then press the [Scale] key to
begin setting the distance.
6) Press [M+] to increment the dis-
tance. When you have reached the
correct number, press [Scale] to ad-
vance to the next digit. You can
press the [Mode] key to move back
one digit.
7) Once the desired value has been
set, press [Set] to store value and ex-
it the programming mode.
Note: Pressing [Reset] will exit the pro-
gramming mode without saving any
value as the Custom Scale.
20 – Scale Master
®
II v2.0