Manual

7 – User’s Guide
Locking Modes, Scales and Units
Your Scale Master Classic comes equipped
with a lock switch that prevents inadvertently
changing drawing scales. When the lock is
activated, a lock symbol will be displayed in the
LCD. While active, the Mode, Scale and Units
cannot be revised.
Turning the Clicker & Beep On/Off
To toggle the rolling click o or on, press
[RESET] + [SCALE]. is will also toggle the
“
count” and error/notication beep o or on.
Using the Custom Scale/Ruler
e default value (after a Clear All/Software
Reset) for Custom Scale is one-to-one (e.g.,
1 inch equals 1 inch). is lets you use your
Scale Master Classic as a rolling ruler, which is
especially useful for measuring irregular shapes.
1) To reset your Custom Scale setting to a one-
to-one ratio, press
[RESET] + [SUBTRACT/
COUNT]
to perform a Clear All.
2) en press the
[MODE] key until the
“
custom” mode appears.
3) Begin rolling.
Memory Function Keystrokes
[RCL] [M1+]
Displays the value stored in the M1+ memory register.
[RCL] [M2x]
Displays the value stored in the
M2x memory register.
(Cont’d)