Manual

11 – User’s Guide
6) Press:
[M1+] to increment the selected digit,
[SUBTRACT/COUNT] to decrement,
[SCALE] to advance to next digit,
[MODE] to move back one digit,
7) Continue to press
[SCALE] until all digits
are set and display returns to zero. e scale
is now stored.
Press [RCL] [SCALE] while in custom mode to
display the current custom scale.
Setting a Height
e height function is used to enter a height
value for nding volume.
1) Press [SUBTRACT/COUNT] + [M2x]. e
annunciator will begin ashing “
ft in” for
U.S. mode or “
m” for Metric mode.
2) If you do not want to change the units, go
to step 3. To change the units, press
[M1+]
until you reach the desired unit.
3) Press
[SCALE] to begin setting the digits.
e left-most digit will begin ashing.
Press:
[M1+] to increment the selected digit,
[SUBTRACT/COUNT] to decrement,
[SCALE] to advance to next digit,
[MODE] to move back one digit.
4) Continue pressing [SCALE] until all digits
are set and the display returns to zero. e
height is now stored.
Note: Once you set your height, you do not need to
enter it again unless you want to change it.