Instruction Manual

10 – Scale Master
®
Classic v3.0
Area and Volume
Finding Area
1) Roll the first dimension and press
[
M1+]. A small “M” will appear in the
scale box display and the main
display will be cleared.
2) Roll the second dimension and press
[
M2x]. The main display will be
cleared.
3) Press [
Rcl] [M2x]. This displays the lin-
ear value stored in this register. The
second press of [M2x] will calculate
and display the area, which is the
value stored in [
M1+] times the value
stored in [
M2x].
Finding Volume
1) Roll the first dimension and press
[M1+].
2) Roll the second dimension and press
[M2x].
3)
Storing a height value (if you have
previously set a height, skip to step 4):
a. To Roll and Store a Height:
i. Roll the third dimension and
press
[Subtract/Count] and [M2x]
simultaneously. The display will
show the rolled value and the unit
of measure will begin flashing.