pocket reference guide

Pocket RefeRence Guide — 21
KEYSTROKE DISPLAY
  0.
 MATL PL AStIC
    (PipeType)
TYPE 80 PLAStIC
Pipe Size Key
When you have chosen a Pipe Material and
Type and then enter Pipe Size, the pipe data
will be displayed.
Forthisexampleweareusing3"Steel,
Schedule80pipe.
KEYSTROKE DISPLAY
 ALL CLEArEd
1.ChoosethePipeMaterial:
 MATL StEEL
2.EnterthePipeType:
    (PipeType) TYPE 80 StEEL
3.EnterthePipeSize:
  3 INCH
4.TogglethroughthePipedata:
 80 SIZE 3 INCH

(OutsideDiameter) OD SIZE 3.5 INCH
 (InternalDiameter) ID SIZE 2.9 INCH
 (WallThickness) THK SIZE 0.3 INCH
 (Material) MATL SIZE StEEL

(WeightperFoot) PIPE SIZE 10.2528 LB PER FEET
(cont'd)
(cont'd)
KEYSTROKE DISPLAY
 (Copper) MATL COPPEr
The last material setting displayed is
selected, and the calculator will retain your
setting even after the power has been
turned off. Once a material is selected,
you can easily toggle through the available
types (Schedules, etc.) using the Pipe Type
function (  ). Available types of pipe
are dependent upon the material setting.
Keystrokes below show the pipe types
available for Plastic (press  until PLAStIC
is shown in the display).
KEYSTROKE DISPLAY
 0.
  MATL PLAStIC
  (Schedule40) TYPE 40 PLAStIC
 (Schedule80) TYPE 80 PLAStIC
 (Schedule120) TYPE 120 PLAStIC
 (SDR21) TYPE SD21 PLAStIC
 (SDR26) TYPE SD26 PLAStIC
 (SDR32.5) TYPE SD32 PLAStIC
 (SDR41) TYPE SD41 PLAStIC
YoucanalsodirectlyenteraPipeType,
e.g.,Schedule80,byenteringanumber
correspondingtothepipetype.