pocket reference guide

Pocket RefeRence Guide — 17
Sixth press of  :
(Fractionalmode) FRAC Std.
 FRAC COnSt.
 (repeats options) FRAC Std.
Seventh press of  :
(MathematicalOperation) MATH OrdEr
 MATH CHAIn
 (repeatsoptions) MATH OrdEr
PERCENTAGE CALCULATIONS
The  keys can be used for nding
a given percent of a number or for working
add-on, discount or division percentage
calculations. It can be used with any type
of number, in any dimension (feet, inch,
millimeter, etc.) and any type of convention
(non-dimensioned, linear, square or cubic).
Calculating Percentages
Find18%of500feet:
KEYSTROKE DISPLAY
 0.
      
  (%) 90 FEET 0 INCH
Take20%from286Feet6inches:
(cont'd)
KEYSTROKE DISPLAY
 FRAC 0-1/32 INCH
 FRAC 0-1/64 INCH
 FRAC 0-1/2 INCH
 FRAC 0-1/4 INCH
 FRAC 0-1/8 INCH
 (repeatsoptions) FRAC 0-1/16 INCH
Second press of  :
(Areadisplays) AREA Std.
 AREA 0. SQ FEET
 AREA 0. SQ INCH
 AREA 0. SQ M
 (repeatsoptions) AREA Std.
Third press of  :
(Volumedisplays) VOL Std.
 VOL 0. CU FEET
 VOL 0. CU M
 (repeats options) VOL Std.
Fourth press of  :
(MeterLineardisplays) METR 0.000 M
 (oatingpoint) METR FLOAt M
 (repeatsoptions) METR 0.000 M
Fifth press of  :
(DecimalDegreedisplays) DEG 0.00º
 (oatingpoint) DEG FLOAt
 (repeatsoptions) DEG 0.00º
(cont'd)