User Guide

10 — PiPe Trades Pro™
Dimensional Function Keys
 Feet – Enters or converts to feet as whole or
decimal numbers. Also used with  and  keys
for entering feet-inch values (e.g.,   
  ). Repeated presses during conversions toggle
between fractional feet-inch and decimal feet.
 Inch – Enters or converts to inches. Entry can be
whole or decimal numbers. Also used with  for
entering fractional inch values (e.g.,   
 ). Repeated presses during conversions toggle
between fractional and decimal inches.
 Fraction Bar – Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8). If the denominator (bottom) is
not entered, the calculator’s fractional accuracy
setting is automatically used. Results are always
shown in typical building fractional format.
 Gallons per Minute (gpm) – Enters or converts to
gallons per minute.
 Liters per Second (l/s) – Enters or converts to
liters per second.
 Cubic Feet per Minute (cfm) – Enters or converts
to cubic feet per minute.
 Cubic Feet per Second (cfs) – Enters or converts
to cubic feet per second.
 Degrees Celsius (°C) – Enters or converts to
degrees Celsius.
 Degrees Fahrenheit (°F) – Enters or converts to
degrees Fahrenheit.
m
Millimeters – Enters or converts to millimeters.

m
Meters (m) – Enters or converts to meters.
 Gallons – Enters or converts to gallons.
 Liters – Enters or converts to liters.