User`s guide

Us e r 's GU i d e — 47
3. Enter a Tolerance Grade of 6 and toggle through the available
Tolerance Positions for the entered Grade:
6gb
(Thread Class) INT MM 6H
b
EXT MM 6G
b
EXT MM 6H
b
* EXT MM 6E
* Repeated presses of
b
will continue to toggle through the available
Tolerance Positions of the specied Grade.
Note: The number 3 can be entered to select both U.S. and Metric
classes. If no Thread Size is stored when accessing the Thread
Classication function, the U.S. Class will always be displayed. In order
to select a Tolerance Class with a Grade of 3 for a Metric Thread Size,
the Metric Thread Size must be stored prior to accessing the Thread
Classication function.
Numeric Thread Size – Model 4087
Enter an 8-32 screw and toggle through the available Internal
Thread (Class 2B) characteristics, then switch to External
Thread (Class 2A) and toggle through the available Thread
characteristics.
Note: The default U.S. Thread Class is 2B (Internal). To view the current
Thread Class, press
gb
. To change the class, press
b
again.
Thread Size calculations for Pitch, Major, and Minor Diameter
attributes are compliant with ANSI/ASME B.1.1-2003 and ANSI/ASME
B.1.1.3M -20 05.
KEYSTROKE DISPLAY
g *
ALL CLEArEd
1. Verify Thread Class is set to 2B:
gb
(Thread Class) INT 2B
2. Enter the Thread Size:
8t
SIZE 8 –
(cont'd)
KEYSTROKE DISPLAY