Hardware manual

Chapter 1 - Introduction
TeleFlow™ 1-1 Standard ACCOL Load
What is the TeleFlow™ Standard ACCOL Load?
The TeleFlow™ Standard ACCOL Load is included on the TeleFlow™ diskette.
This ACCOL load contains ACCOL modules specifically configured to perform
various natural gas calculations using a standard I/O setup. It is discussed in detail
in Chapter 2 of this manual.
The TeleFlow™ Standard ACCOL Load is used in conjunction with the TeleFlow
Menu System (TMS) menus (discussed below), and the TeleFlow™ EGM 3530
Electronic Gas Measurement Computer.
For information on the TeleFlow™ Electronic Gas Measurement Computer, see the
CI-3530-xx hardware manual for your particular TeleFlow™ model.
What Are the TMS Menus?
The TeleFlow Menu System (TMS) menus, which may be run on the PC, are
specifically configured to collect and display data from the TeleFlow Standard
ACCOL Load. These menus are discussed in detail in Appendix F of the appropriate
TeleFlow™ hardware manual.
Modifying or Replacing the TeleFlow Standard ACCOL Load
The TeleFlow is a download-able ACCOL device, therefore, the TeleFlow Standard
ACCOL Load can be modified or replaced with another compatible ACCOL load.
(See Appendix A for some notes about modifying the TeleFlow Standard ACCOL
Load.) For example, if the TeleFlow Standard ACCOL Load does not fit your
particular application, you may modify the .ACC file in ACCOL Workbench
software (available separately from Bristol Babcock,) re-build the ACL file, and
download it into the TeleFlow . For more information on ACCOL Workbench, see
the ACCOL Workbench User Manual (document# D4051).
Be aware, also, that the TeleFlow Menu System (TMS) is closely tied to the
TeleFlow Standard ACCOL Load. If you modify the standard load, or create a
different load, you will need to modify the menus which make up TMS, using the
UOI program (available separately from Bristol Babcock). For more information on
UOI, see the UOI Configuration Manual (document# D5074).