Hardware manual

Chapter 2 - TeleFlow Standard ACCOL Load
TeleFlow™ 2-17 Standard ACCOL Load
Base Temperature
Flowing Viscosity
Ratio of Specific Heat
Tap Location
Tap Type
Dp Cutoff
LIST 13 Configuration #2 - Slave Point 3
Firmware version (progrev)
Meter Number
Flow Equation 1985/1992
Calculation Interval
Contract Hour
Logging Interval
Break Log option
Heat Value source
Gravity type
AGA8 Method
AGA8 Gross Mode
LIST 14 Controller - Slave Point 4
Sampler Enable On/Off
Sampler Volume 0 - 10000 MCF
Sampler Duration 1.0 Secs
Flow Rate Control Off/On
Valve Limiting Off/On
Setpoint 0 MSCF
Deadband 0
Gain 0-100
Integral 0-60 RPTS/Min 1
Derivative 0-60 Min 0
Valve Travel Time 1-30 SEC 30
Maximum Flow Rate 5000 MSCF 5000
Nomination enable Off/On
Nomination unit MSCF/MMBTU
Nomination mode
Nomination stop mode Fast/PID
Nomination Daily mode Off/On
Nomination Alarm dialout Off/On
Nomination Alarm percent 0 - 100
Next start date