Specifications
53
Genies and Super Genies objects are dened to design the motor control application. They use structured
variables that come from XVM les generated by Unity.
For each type of graphical object (pump, motor,…) a genie is created. This genie can be pasted from a genie
dialog box and added to the graphics page. When the genie is pasted in the graphical page subsequently, a popup
window is activated to substitute the tags used in the Super Genie called by the genie. Each super genie is
associated to a Cicode function; this function :
- substitutes tags in the Super Genie
- opens the Super Genie
SCADA
principle
Starter DDT
associated
SCADA
example
5-Implementation
SCADA implementation
For pump or motor management a Genie is linked to two Super Genies (gure below). Clicking on a Genie pump
object opens a rst popup (Super Genie) which provides a rst level of diagnostic information. In order to have
additional diagnostic information a “detail” button has to be used to open a second popup (Super Genie).
On Click
Cicode Open Small_HMI_a and pass variables
On Click
Cicode Open Big_HMI_a and pass variables