Specifications

44
For each type of associated starter at each connection type, a dedicated DFB and data structure are
implemented
The next table lists the set of objects
Starter DFB I/O scanning Param (Structure) Param (Structure)
ATV 61 MOT_ATV61 ATV61_IO_SCAN HMI_MOTOR_A PUMP_PARAM
ATV31 MOT_ATV31 ATV31_IO_SCAN_I
ATV31_IO_SCAN_O
HMI_MOTOR_C PUMP_PARAM
ATS48 MOT_ATS48 ATS48_IO_SCAN_I
ATS48_IO_SCAN_IM-
ATS48_IO_SCAN_O
HMI_MOTOR_B PUMP_PARAM
TeSys U std
(com)
MOT_TeSysU_s TeSysUs_IO_SCAN_I
TeSysU_IO_SCAN_O
HMI_MOTOR_TU_s PUMP_PARAM
TeSys U std
(com)
MOT_TeSysU_a TeSysUa_IO_SCAN_I
TeSysU_IO_SCAN_O
HMI_MOTOR_TU_a PUMP_PARAM
TeSys U std
(com)
MOT_TeSysU_m TeSysUm_IO_SCAN_I
TeSysU_IO_SCAN_O
HMI_MOTOR_TU_m PUMP_PARAM
TeSys U on
EPI2145
MOT_
EPI2145_2D
Stb_EPI2145_IO_SCAN_I
Stb_EPI2145_IO_SCAN_O
HMI_MOTOR_EPI_2D PUMP_EPI_PARAM
Purpose
Overview
5-Implementation
Introduction
The main purpose of this chapter is to detail how to implement the various components introduced in the Design
chapter.
An example of implementation will also be described in Chapter 7 with additional information concerning
programming rules and examples.