Use And Care Manual

ManualsBrandsCalculated Industries ManualsTools & HardwareConstruction Master 5 Ft-Inch-Fraction Construction Calculator

POCKET REFERENCE GUIDE — 9

Ç √ x

2

— Squares a linear or

non-dimensional value.

Ç • Total Cost — Based on

entry of per unit cost.

Ç 0 Store Weight per Volume

— Stores a new Weight per

Volume value as listed

below:

Note: After entering a value and

pressing Ç 0, continue

pressing the 0 digit key until

you’ve reached the desired

Weight per Volume format. To

recall your setting, press ® 0.

• Ton Per CU YD

• LB Per CU YD

• LB Per CU FEET

• MET Ton Per CU M

• kG Per CU M

This value is stored until

you change it or perform a

Clear All (Ç x).

Ç 5 On-Center Spacing (o.c.)

— Stores a new on-center

spacing (e.g., 2 4 i

Ç5). The value is used

for jack and rake wall stud

calculations. Default is 16”.