Daim Ntawv Qhia Tus Neeg Siv

6/6
The Dart 2 will operate with default settings out of the box. These can be changed using the OEM Admin interface. The
defaults include:
Hourly Heartbeats: the device will log a heartbeat record, connect to the server, and refresh its GPS data every 60
minutes.
Logging: The device will log a record in trip every 60 seconds or 500m travelled. It will also log a record when the
direction is changed by 10° and 150m is travelled with the new heading.
Wired AND Emulated Ignition: by default, the Dart will track a trip if either the ignition wire is pulled high or
movement is detected. The setting can be changed to do one or the other, or continue to use both.
Default I/O Mappings
Digital
Mappings
Description
0 Ignition
5 GPS Interference
6 GPS Jamming
Analogue Mappings Description
1 Battery Voltage
2 External Voltage
3 Device Temperature
4 GSM reception
Driver ID Options
The Dart2 has both iButton and TTL interfaces, which can be used to read a wide variety of Driver ID readers. See
Driver ID Reader Options
(https://support.digitalmatter.com/en/support/solutions/articles/16000109826)
Driver ID & Immobilisation methods with Powered Devices
(https://support.digitalmatter.com/en/support/solutions/articles/16000095701)
Default Parameter Settings
Getting Started Guide – Dart + Dart2