User manual

SPECIFICATIONS
001-7100-100 Version 0 Page 64 of 66 Vanguard 3G User Manual CDMA Version
8. SPECIFICATIONS
Product specifications are subject to change without notice.
GENERAL SPECIFICATIONS
Interface Connectors: RS-232 DE-9S Connector (DCE female)
10/100 Base-T Full Duplex
USB Client port
3
Power Connector: Molex 43045-4000 MicroFit 3.0, 4 pin header
LED Indicators: WiFi, PWR, STAT, NET, GPS
Antenna Interface: Primary Antenna: 50-Ohm TNC Female
Diversity Antenna: 50-Ohm SMA Female
GPS Antenna: 50-Ohm, 3.3V SMA Female
WiFi Antenna: 50-Ohm RP-SMA Plug
Size: 5.5 (L) x 6.0 (W) x 1.8(H) inches (14 x 15.25 x 4.5 cm)
Weight: 2.65lb (1.2 kg)
Power Input: 9-28 VDC
Current Consumption RX Mode TX Mode
With WiFi module 240 mA 500 mA
Without WiFi module 130 mA 350 mA
Current Consumption
4
(Average at 13.8 VDC)
Max TX Power Range: CDMA: 22.5-24.5 dBm
(Includes cable loss 0.5dB) WiFi: 15.5–17.5 dBm (802.11b) & 11.5–13.5 dBm (802.11g)
Rx Sensitivity: CDMA: <-104 dBm
WiFi: <-83 dBm (802.11b) & <-70 dBm (802.11g)
Frequencies: Cellular: TX: 824-849 MHz RX: 869-894 MHz
PCS: TX: 1850-1910 MHz RX: 1930-1990 MHz
WIFI: TX/RX: 2412-2462MHz
Temperature: Operating: -30°C to +60°C 100% duty cycle
Note: Cellular TX power may be reduced outside this range
Storage: -40° to +85°C (-40° to 185°F)
Vibration: MIL-STD-810F Method 514.4
Shock: MIL-STD-810F, Method 516.5
Emissions: FCC Part 15b
Transport Protocol: UDP/TCP
Command Protocol: Web Interface
Certifications: FCC ID: EOT14071R2 IC: 773A-14071R2
EU : RoHS, CE Australia: A-TICK
3
Reserved for future use
4
Current consumption while transmitting is dependent on the TX power level of the cellular module. The TX power level of the module is
controlled by the cellular base station, not the Vanguard 3G software