User manual

CONFIGURATION
001-7100-100 Version 0 Page 57 of 66 Vanguard 3G User Manual CDMA Version
• Choose to be notified when the value goes out of acceptable range and returns into range by
enabling each diagnostic value.
The user can also enable and disable digital alarms by selecting appropriate “enable” and “disable”
radio buttons.
The alarm messages can be configured for each diagnostic value under I/O SettingsÆLabels (see
Figure 38) for both going out of range (OOR) and returning to normal (Normal).
Remember to save your settings for each configuration.
Figure 37 - I/O Settings