User manual

GETTING STARTED
001-7100-100 Version 0 Page 22 of 66 Vanguard 3G User Manual CDMA Version
4. Once the module is activated, browse to an Internet web page to confirm connectivity.
Note: Should you experience problems connecting to the web page, reset the Vanguard
3G unit by clicking RESET on the top right of the screen and try reconnecting to the web
page.
4.5.3 Provisioning the Vanguard 3G Radio Modem with Bell Mobility
1. On the left side of the screen, select the Cellular (WAN) page. Select “Activation” tab.
2. In the “Manual-Entry Activation” portion of the screen (Figure 11), enter MDN, MIN, and
Unlock code as provided by Bell Mobility. Click Submit. Provisioning will occur automatically
after the parameters are loaded.
3. After a few moments you will receive a message saying the activation was successful. Once
activation is complete, the unit will reset.
4. Once the module is activated, browse to an Internet web page to confirm connectivity.
Note: Should you experience problems connecting to the web page, reset the Vanguard
3G unit by clicking RESET on the top right of the screen and try reconnecting to the web
page.
Figure 11 - Vanguard 3G product Cellular (WAN) page Manual-Entry Activation
Figure 12 - Vanguard 3G product Cellular (WAN) page OTASP/IOTA Activation
Note: For more details on provisioning refer to section 5.3.3 and section 6.