User manual

PRODUCT OVERVIEW
001-7100-100 Version 0 Page 10 of 66 Vanguard 3G User Manual CDMA Version
2.6 RJ-45 Ethernet Port Integration Parameters
Table 2 below provides the information to purchase Ethernet cables to integrate the Vanguard
3G product into your system.
Note:
The Vanguard 3G radio modem can accept either a standard or cross over Ethernet cable.
Table 2 - Standard RJ-45 Ethernet Pin-out
Pin Function Color
1 TX + White/Orange
2
TX -
Orange/White
3
RX +
White/Green
4 Blue/White
5 White/Blue
6
RX -
Green/White
7 White/Brown
8 Brown/White
2.7 Power Cable Connections
If using the provided power cable to connect to a DC supply (car battery) use the following
diagrams and table to connect the unit.
Note: Both ignition sense and DC power are required to start up a Vanguard 3G unit.
Figure 3 - Dataradio Vanguard 3G Power Cable Connections