Operation Manual

STAG04HT & PTAG04

Operation manual:

Calamp’s STAG04 have been developed to work alongside the tracking and monitoring

devices. They can report presence/ absence as well as the data for alert notifications

(temperature/ humidity). The logging checks and stores temperature and humidity every 60

seconds to local memory. When in the range of a compatible device, the logged data is

communicated to our server for storage, visualization and analysis.

Installation of the STAG04 is via a 3M adhesive backing which provides a strong attachment

to plastic and metal assets. Each STAG04 has a unique identifier that is presented as a

number and a barcode on its label. Association is completed by scanning this barcode and

entering details regarding the asset.

The STAG04 communicates via a proprietary protocol over 2.4GHz, with a Tx power of

0dBm. The range is 20m indoors, and 80m outdoors (LOS). The LocoTag reporting interval

is every 5 seconds, and the logging frequency is 15 minutes, which provides a 30 day

logging buffer. The temperature accuracy is sub 1 degree C (NIST traceable) and humidity

is sub 2% RH accuracy.

PAGE 1
STAG04HT & PTAG04 Operation manual: Calamp’s STAG04 have been developed to work alongside the tracking and monitoring devices. They can report presence/ absence as well as the data for alert notifications (temperature/ humidity). The logging checks and stores temperature and humidity every 60 seconds to local memory. When in the range of a compatible device, the logged data is communicated to our server for storage, visualization and analysis.
PAGE 2
Regulatory Information Human Exposure Compliance Statement Pursuant to 47 CFR § 15.247 (i) of the FCC Rules and Regulations, personal communications services (PCS) equipment is subject to the radio frequency radiation exposure requirements specified in § 1.1307(b), § 2.1091 and § 2.1093, as appropriate. CalAmp Wireless Networks Inc.
PAGE 3
receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.