User manual

ASCII Pattern
The packets will be 52 characters in length. The pattern used to build the packets will have the following format (in
ASCII):
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
---
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
ASCII Number Pattern
The packets will be 48 characters in length. The pattern used to build the packets will have the following format (in
ASCII):
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
---
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
Binary Pattern
The packets will be 16 characters in length. The pattern used to build the packets will have the following format (in
Hex):
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
---
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
Random Binary Pattern
The packets will be 16 characters in length and contain random binary data.
 Packet Size
Packet Size displays the number of bytes in each packet.
 # of Packets/Block
Displays the number of packets in each transmission block
 Total Bytes/Block
Displays the total number of blocks in each transmission block
 # Blocks to Send
Displays the number of blocks to be sent to the Remote device (after selected number has been sent, transmission
automatically stops).
 Block Delay
Displays the amount of time (in seconds) of delay between each block transmission (range is from
0.000 to 5.000 seconds in 0.125 second intervals). Block Delay is user programmable.
Page | 56