User manual

 Low/High RSSI
Enter the high and low limits for acceptable RSSI levels (in dBm).
 Low/High Temp
Enter the high and low limits for acceptable temperature levels (in Celsius).
 Low/High Batt
Enter the high and low limits for acceptable battery voltage levels (in volts).
 Low/High Fwd Pwr
Enter the high and low limits for acceptable forward power levels (in watts).
4.4.8 USER TEST
From the Programmer Window, Select Utilities – User Test. The User Test utility is an Offline function and requires
suspension of network operation.
Figure 35: User Test Screen
A User Test’s diagnostic parameters include:
 Unit ID
The Short ID of the unit from which the diagnostics were received
 RSSI Level
Received Signal Strength Indication in dBm.
 Battery Voltage
Supply voltage in volts.
 Temperature
Internal temperature in Celsius.
 Forward Power
Forward power in watts or dBm.
Page | 49