User manual

 Save
Allows the user to save the current Offline Link Test results to a file.
The Offline Link Test returns the following statistics:
 Blocks Tx’ed to Remote
Displays the number of data blocks transmitted to the remote unit.
 Responses from Remote
Displays the number of responses heard from the remote unit.
 Blocks Rx’ed from Remote
Displays the number of data blocks received from the remote unit.
 Link Quality to Remote
Displays the receive quality of the remote unit; the number of correctly decoded transmissions received by the
remote divided by the number of total transmissions detected by the remote (in %).
 Link Quality from Remote
Displays the ratio of data blocks received to data blocks transmitted (in %).
 Overall Link Quality
Displays the overall link quality by combining the Link Quality to Remote ratio with the Link Quality from Remote
ratio (in %).
 # of Blocks to Send
Allows the user to determine the number of blocks to send before stopping (with 0 being disabled).
 Block Delay (s)
Allows the user to determine the delay between the transmission of data blocks in 0.25 second intervals (0.00 to
10.00 seconds).
4.4.5 OFFLINE DIAGNOSTICS
From the Programmer Window, Select Utilities – Offline Diagnostics for user access to the Get Diags request. An Offline
Diagnostics request requires suspension of user network operation.
Page | 42