User manual

Figure 30: Port Statistics Screen
 Baud Rate
Displays the current setting for the utilized COM port
 RTS
RTS is an output from the user connected DTE device. This will be checked if active.
 DTR
DTR is an output from the user connected DTE device. This will be checked if active.
 CTS
CTS is an input to the user connected DTE device. This will be checked if active.
 DSR
DSR is an input to the user connected DTE device. This will be checked if active.
 DCD
DCD is an input to the user connected DTE device. This will be checked if active.
 Bytes Tx’ed
Displays the number of bytes (characters) transmitted since the port was last opened.
 Bytes Rx’ed
Shows the number of bytes (characters) received since the port was last opened.
 Framing Errors
Shows the number of Framing Errors received since the port was last opened.
Page | 40