User manual

4.3.3 LIST INFORMATION
From the Programmer Window, Select Edit – List information to display the following information about the connected
device. The List Information Utility is a diagnostic tool for the modem’s firmware. This information will be required when
consulting with the Technical Support Department.
Figure 23: List Request Screen
4.3.4 APPLY INTEGRA RESET
From the Programmer Window, Select Edit – Apply Integra Reset to access the Reset Utility. Integra Reset tells the Integra-
TR to perform a software reset. Select OK to perform station reset. The reset action performs the same function as cycling
power to the device.
Figure 24: Apply Integra Reset Screens
4.3.5 PROGRAM COMMENT/ID
From the Programmer Window, Select Edit – Program/Comment ID to access the Program Comment/ID configuration
screens. This utility is particularly useful if the Integra-TR being programmed was cloned from another unit (See Figure 25).
Page | 33