USAT USATCORP.COM Contact USATCORP.
INTEGRA-TR™ WIRELESS MODEM FOR LICENSED SPECTRUM USER MANUAL PN 001-4008-100 REV 6 FEBRUARY 2013
REVISION HISTORY Rev 0 June 2011 Initial Release. Rev 1 August 2011 Changed Dual Band references to Dual IF, sections 1.6 and 1.8. Deleted Synthesizer reference, section 4.3.1.3. Rev 2 January 2012 Added VHF Dual Band specifications and part numbers, splinter channel frequencies and FCC/IC indicators. Rev 3 April 2012 Corrected part numbers in section 1.6. Rev 4 September 2012 Updated VHF model numbers, FCC and IC Emission Designators. Rev 5 November 2012 Added the 12.5/6.
Important Notices Because of the nature of wireless communication, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors), or be totally lost. Significant delays or losses of data are rare when wireless devices such as the Integra-TR are used in a normal manner with a well-constructed network.
Table of Contents 1 PRODUCT OVERVIEW ........................................................................................................................................................... 6 1.1 General Description ..................................................................................................................................................... 6 1.2 Operational Characteristics ............................................................................................................
4.4.11 Ping Test ............................................................................................................................................................. 55 4.4.12 ASCII/Hex Terminal ............................................................................................................................................ 57 4.5 Program Code Menu ..............................................................................................................................................
1 PRODUCT OVERVIEW This document provides the information required for the operation and preventive maintenance of the Integra-TR integrated wireless modem. This manual is intended for system designers, installers and maintenance technicians. The Field Programming Software for the Integra is the professional service installer interface. The Field Programming Software should never be made available to unqualified personnel. 1.
1.3 PHYSICAL DESCRIPTION Integra-TR consists of a logic PCB (which includes modem circuitry) and a radio module. Each logic PCB and radio module are matched together and characterized in the factory to optimize performance as an intelligent unit. The two boards then slide into the rails of an extruded aluminum case. DTE connection is made via a front panel connector. Power is applied through a rear panel 4-pin connector which includes two programmable analog connections usable as inputs or outputs.
CS/SYN RX/TX RD/TD Off No RF RX carrier Green Receive carrier present Red (Reserved) Off No RF RX carrier Green Receiving network data Yellow Synthesizer unlocked Red Transmitter is on Off Idle Green RX data outgoing from RS-232 port Red TX data incoming at RS-232 port (or Buffered in CSMA Mode) 1.4.3 COM PORT Integra-TR is configured as DCE. DTE devices should be connected using a nine-conductor pin-to-pin straight cable (PN 6974008-408).
For DTE that lack RTS control, Integra-TR can operate in DOX (Data Operated Transmit) mode with only Transmit Data, Receive Data and Ground. This 3-wire interface is shown in Figure XX. Figure 3 - 3-wire Interface 1.4.4 SETUP PORT The Setup port uses a DE-9 female connector configured as DCE. Signals are described in Table 3.
1.5.1 HEAT SINK The rear panel heat sink is essential for proper operation of the Integra-TR transmitter. The unit must be mounted in a location that permits free air circulation past the heat sink. Cooling will be best if the fins are vertical. 1.5.2 POWER – I/O CONNECTOR The Integra-TR power requires a regulated power source of 13.3 VDC nominal (10-16 VDC MAX) negative ground with a 3.0 A rating.
1.6.1 TRANSCEIVER IDENTIFICATION The transceiver identification is a random, unique serial number (SN) that can be found on the side label of the Integra-TR device. It is also printed on the box label. 1.
1.8 SPECIFICATIONS These specifications are subject to change without notice. RF specifications are measured per TIA/EIA-603 with a psophometric baseband filter. General Frequency Channels Channel Bandwidth Operating Temperature Supply Voltage RX Current Drain at 13.3 VDC TX Current Drain at 13.3 VDC Power Saving Mode Current Drain 1 Cold Start 2 Warm Start Rx 3 Warm Start Tx 4 Tx Turn On Time RX/TX Bandwidth (without tuning) + VHF 136-174 Dual IF, UHF 406.
Modem/Logic Operation Simplex/half duplex Data Bit Rates (b/s) 25 kHz: 4800/9600/19200; 12.5 kHz: 4800/9600 Modulation Type DRCMSK (Differential Raise-Cosine Minimum Shift Keying) RTS/CTS Delay (RTS mode) 4 ms Addressing 10 bit station address, 1 bit station type (master / remote) 12.5 kHz @ 9.6 kbps: -104 dBm, 1x10-6 @ 1.4 µV 25 kHz @ 4.8 or 9.6 kbps: -107 dBm, 1x10-6 @ 1.0 µV 25 kHz @ 19.2 kbps: -100 dBm, 1x10-6 @ 2.
Approvals/Certifications UHF FCC IDENTIFIER NP44048350 IC 773B-4048350 9K30F1D, 15K3F1D IDENTIFIER 9K30F1D, 15K3F1D FCC IDENTIFIER NP44048351 3K30F1D, 3K40F1D, 8K80F1D FCC IDENTIFIER NP44048551 3K30F1D, 3K40F1D, 8K80F1D IC IDENTIFIER 773B-4048351 3K30F1D, 3K40F1D, 8K80F1D IC IDENTIFIER 773B-4048551 3K30F1D, 3K40F1D, 8K80F1D 2 GETTING STARTED It is easy to set up an Integra-TR network to verify basic unit operation and experiment with network designs and configurations.
Integra-TR FPS is available on the Start-Up CD-ROM as a .zip file. You may also visit the Download Library available from the Support Menu at www.calamp.com for the most current version available. The Field Programming Software for the Integra is the professional service installer interface. The Field Programming Software should never be made available to unqualified personnel. 2.2.
2.2.2 USING THE FPS Make sure all connections are made as shown in the diagram and then power on the device. STEP 1 Locate the Dataradio Utils folder (or if you named the Program Group box differently during install) and select the IntegraTR application. STEP 2 From the Integra-TR Programmer screen, click on the Program button in the upper left corner. This will bring up the Program Parameters screen and display the option to automatically configure the device as a Remote or Master. Click OK.
STEP 3 Click the Parms button in the upper left corner of the FPS screen. Here the Modem, Com/Analog, Radio and Frequencies settings can be changed. Click OK when done. Your modem is now ready for use. 3 NETWORK APPLICATIONS Integra-TR is suited to a variety of network applications. Its primary design goal was to satisfy the needs of SCADA systems using RTUs or PLCs in either point-to-point or point-to-multipoint service. Below is an overview of common configurations. 3.
Figure 7 - Point-to-Point System 3.2.2 POINT-TO-MULTIPOINT SYSTEM A basic point-to-multipoint system is shown in Figure XX. Figure 8 - Point-to-Multipoint System (simplex or half-duplex) If a half-duplex radio network is used (i.e. two frequencies with the master station transmitting and receiving on the reverse pair from the remotes), the master station can be either full duplex or half-duplex. If a simplex radio network is used (i.e.
Figure 10 - Point-to-Multipoint System (full-duplex repeater) Page | 19
3.2.3 EXTENDING A LANDLINE (TAIL CIRCUIT) Integra-TR may be used to extend a landline circuit (giving access to difficult locations, etc.). This type of connection is called a “tail circuit” and is shown in Figure 11. The tail circuit assembly may be used in any of the network types described in the preceding sections. Figure 11 - Landline (Tail Circuit) Note: The line modems should be full-duplex units.
4 INTEGRA-TR FIELD PROGRAMMING SOFTWARE The Integra-TR Field Programming Software is the programming and diagnostics software for the Integra-TR wireless modem. The Field Programming Software allows the user to edit and program user programmable settings, interactively tune modem and RF parameters, and monitor diagnostic data from the Integra-TR. Integra Field Programming Software is available on the Start-Up Disc shipped with this device.
Save Data File Save Data File As Open Integra Data File Figure 14: Integra-TR Programmer – File Menu 4.
4.3.1 SETUP MODEM/RADIO PARAMETERS To access the Setup Modem/Radio Parameters screen, use the Parms Icon. You may also access this screen from the Edit menu. Setup Modem/Radio Parameters allows the user to view and edit Integra-TR’s programmable parameters. Programming parameters can be stored in a data file with the .DAT file extension.
Short ID Enter a Short ID number that will be used to identify an individual device within the network. Short IDs may range from 1 to 254 or from 256 to 1023. Short ID 255 is reserved. Note: Firmware versions 2.10 and earlier only allow short IDs of 1-254. Serial No. Displays the serial number for the modem board of the connected device. Comment Integra-TR Field Programming Software supplies this field for user-convenient description(s): customer name, location. technical info...).
Station ID (CWID) Enter the Station ID (CWID) or FCC Call Sign for the system. It is sent out as Morse Code at predetermined intervals. Station ID is a combination of letters (upper-case) and numbers (0 - 9) up to 9 characters in length. CWID Interval CWID Interval is used to set the interval of time the unit will transmit the Station ID (CWID) or FCC Call Sign. The range is 1 to 255 minutes in 1 minute intervals, with 0 being disabled.
4.3.1.2 SET UP MODEM/RADIO PARAMETERS: COM/ANALOG TAB The COM/Analog tab allows user programming of various COM Port and External input/output parameters (see Figure 18). Figure 18: COM/Analog Setup Parameters Screen 4.3.1.2.
DCD Control Radio button selection for RS-232 DCD (Data Carrier Detect) mode • Active – DCD is always asserted • Switched – follows the radio carrier and data sent to DTE DTE Baud Rate Select 1200/2400/4800/9600/19200 to configure the port speed of the COM Port DTE Data Format User Selectable; Default = 8 bits, no parity, 1 stop.
4.3.1.2.2.1 EXTERNAL I/O 1 (GREEN) These radio buttons select configuration of Pin 3 on the Power - I/O Connector (green wire): Analog Input An option on units not equipped with the cooling fan option - can be used to monitor an external voltage (0 to 10 volts).
Digital Output This connection can be used to control the open-collector transistor on the connector. The open-collector output can sink a maximum current of 40 mA when the modem board rev is 0 and 100 mA when the modem board rev is 1. The output is controlled from the Offline Diagnostics screen NOTE: When configured as a Digital Output, the open-collector transistor requires an external pull-up (i.e., resistor) to a voltage of 2 to 10 volts.
Radio Display the model of the connected radio device Range Displays the range number of the connected radio device Channel Bandwidth Displays the channel bandwidth of the connected device: Half-channel (12.
Selected Channel This field allows the user to choose a selected channel pair for receiving and transmitting. Allowable entries are 1 to 16. The selected channel will be used if Channel Select 1 and Channel Select 2 are NOT selected. (COM/Analog Tab). Note: This feature is disabled when a Channel Select Line is enabled (green or white wire).
The frequencies for these splinter channels are: 154.456250 154.463750 154.471250 154.478750 173.203750 173.237500 173.262500 173.287500 173.312500 173.337500 173.362500 173.396250 Tx Power This field designates the channel pair Power Output Adjust value. The default value is 255 (5 watts). This value should be left at the default value unless lower power is required to meet regulatory requirements, to increase the allowable transmit duty cycle or to reduce transmit power.
4.3.3 LIST INFORMATION From the Programmer Window, Select Edit – List information to display the following information about the connected device. The List Information Utility is a diagnostic tool for the modem’s firmware. This information will be required when consulting with the Technical Support Department. Figure 23: List Request Screen 4.3.4 APPLY INTEGRA RESET From the Programmer Window, Select Edit – Apply Integra Reset to access the Reset Utility.
Figure 25: Program Comment/ID Screen Short ID Enter a number (from 1 to 254 and 256 to 1023 - 255 is reserved) used to identify an individual unit within the network. You must click the Program Short ID button for changes to take effect. Comment Enter a short description that may be used to identify the device. Comments often include a name, a location, technical information, or other user desired information. Comment fields must be in text format and are limited to 24 characters, including spaces.
4.3.7 READ PARAMETERS From the Programmer Window, Select Edit – Read Parameters. The Read Parameters function tells the Integra-TR to pull the parameters that are currently programmed in the Integra-TR. To view these parameters, click the Parms Icon after running the Read utility. 4.3.8 COPY PARAMETERS From the Programmer Window, Select Edit – Copy Parameters.
4.4.1 PORT SETTINGS From the Programmer Window, Select Utilities – Port Settings Integra-TR programming is done through the PC’s Primary COM Port. Primary and secondary COM ports are configured with the Field Programming Software. The programming cable (included in the Programming Kit - DRL part number 250-4008001) is connected from the Setup Port on the Integra-TR to the PC’s COM port configured as the Primary Port.
Stop Bits Select 1 or 2 for the number of Stop Bits transmitted or received for the Primary and Secondary COM Ports DTR Enable Select Yes/No. Enable to assert the DTR (Data Terminal Ready) line of the RS-232 Port when the port is open for the Primary and Secondary COM Ports. Mode Select the communication mode to be used by the Integra-TR. Refer to Table XX for Communication Mode descriptions.
4.4.1.2 ADVANCED PORT SETTINGS Figure 29 – Port Settings Advanced Tab Ignore DCD Before Tx’ing Allows the user to check for an inactive DCD before transmitting. If selected, no data is sent until DCD becomes active DCD Timeout If Ignore DCD Before Tx’ing is selected, DCD Timeout determines the length of time to wait for DCD to become inactive before data is sent. If the DCD does not become inactive during this time, the data is not sent.
DMP Baud Rate Select 1200, 2400, 4800, 9600, 19200, 38400 or 115200 to set the communication speed for Primary and Secondary COM Ports when using the DMP Protocol. DMP is used to talk to the Integra modems through the Setup Port. SYNC/ESC Framing A typical SYNC/ESC frame will look like the following character stream.
Figure 30: Port Statistics Screen Baud Rate Displays the current setting for the utilized COM port RTS RTS is an output from the user connected DTE device. This will be checked if active. DTR DTR is an output from the user connected DTE device. This will be checked if active. CTS CTS is an input to the user connected DTE device. This will be checked if active. DSR DSR is an input to the user connected DTE device. This will be checked if active.
4.4.4 OFFLINE LINK TEST From the Programmer Window, Select Utilities – Offline Link Test The Offline Link Test is used to test the link between two units – the local unit connected to the PC and a remote unit. Blocks of data are transmitted to the remote unit and the remote unit decodes and returns them. The transmitted and received data blocks are compared and the ratio of the results is calculated. The Offline Link Test requires suspension of user network operation.
Save Allows the user to save the current Offline Link Test results to a file. The Offline Link Test returns the following statistics: Blocks Tx’ed to Remote Displays the number of data blocks transmitted to the remote unit. Responses from Remote Displays the number of responses heard from the remote unit. Blocks Rx’ed from Remote Displays the number of data blocks received from the remote unit.
Figure 32: Offline Diagnostics Screen Offline Diagnostic parameters include the following: Unit ID The Short ID of the unit sending diagnostics. RSSI Level Received Signal Strength Indication in dBm. Battery Voltage Supply voltage Temperature Internal case temperature in Celsius. Forward Power Forward power in watts or dBm. Reverse Power Reverse power in watts or dBm. Preamble Good The number of correctly decoded transmissions received in the last 15.
XCVR Status Displays the status of the transceiver. Tx Timeout A request for a remote unit to transmit causes the unti to transmit on the programmed transmit frequency until the Tx Timeout Timer expires. Program the Tx Timeout Timer in the Setup Modem/Radio Parameters/Radio Tab. Progress The Progress panel shows the progress of the Get Diags request. Tx Mode Allows the user to select different transmit modes when the unit is told to transmit: o Tone: the unit will transmit a 1200 Hz tone.
Remote ID Allows the user to send diagnostic commands to any specific remote unit and obtain its diagnostic information. The Remote ID is selected from the list of Remote IDs set up in the Diagnostic IDs and Alarms screen. Diagnostic Select Selected Remote ID This button allows the user to gather Offline Diagnostics from the selected Remote ID only. Remote ID List This button allows the user to gather Offline Diagnostics from all the IDs in the list of Remote IDs (including the local unit).
interfaced with will output Online Diagnostics as they are received. Using Online Diagnostics does not require suspension of network operation. Online Diagnostics are subject to alarm conditions defined in Section XXX Diagnostic IDs and Alarms. When Online Diagnostics are received and a diagnostic field falls outside the alarm limits, value X will be designated as less than < or greater than > the allowed parameters.
RevP Reverse Power displays the approximate measure of reverse (reflected) power of the unit transmitting the diagnostics. This is represented as “Good” if the reverse power is within acceptable limits and is represented as “Bad” if the reverse power is too high. The threshold is set to approximately 1/4 the forward power. Remote RSSI If these are the diagnostics from a Remote Station, Remote RSSI indicates the RSSI level of the Remote Station from the last received transmission.
4.4.7 DIAGNOSTIC IDS AND ALARMS From the Programmer Window, Select Utilities – Diagnostics IDs and Alarms The Diagnostics IDs and Alarms screen allows the user to set up the ID List for use with the Offline Link Test, and Offline and Online Diagnostics as well as Alarms for use with Online Diagnostics. Figure 34: Diagnostic IDs and Alarms Screen 4.4.7.1 ID ENTRY AND LIST ID Entry Allows the user to add Short IDs to the ID List. The range of this field is 1 to 1023 (ID 255 is reserved).
Low/High RSSI Enter the high and low limits for acceptable RSSI levels (in dBm). Low/High Temp Enter the high and low limits for acceptable temperature levels (in Celsius). Low/High Batt Enter the high and low limits for acceptable battery voltage levels (in volts). Low/High Fwd Pwr Enter the high and low limits for acceptable forward power levels (in watts). 4.4.8 USER TEST From the Programmer Window, Select Utilities – User Test.
Reverse Power Reverse power in watts or dBm. External I/O 1 Voltage on the External I/O 1 Input from the Power - I/O Connector (in volts). External I/O 2 Voltage on the External I/O Input from the Power - I/O Connector (in volts). Preamble Good The number of correctly decoded transmissions received in the last 15. Used with Preamble Total, this serves as an indication of how well the unit is receiving data. Preamble Total The number of total transmissions detected, maximum is 15.
4.4.9 PACKET TEST From the Programmer Window, Select Utilities – Packet Test The Packet Test allows the user to simulate a Host/Remote polling environment. The Host will send out a packet to the Remote and the Remote will reply to the Master with the same packet information. This test is useful for testing the modem link.
Overall % Shows the percentage of Host received packets versus Host transmitted packets # of Packets to Send A programmable number to tell the Host how many data packets to send to the Remote. After the programmed number of data packets are sent, the transmission will automatically stop Bytes of Data/Packet A programmable number to tell the Host the number of data bytes to send in each packet.
4.4.10 ARRAY TEST From the Programmer Window, Select Utilities – Array Test. The Array Test utility is used to send programmable length test packets. The packets are built using one of four possible patterns. For pattern descriptions, refer to Section XX.
4.4.10.1 PATTERN DESCRIPTIONS ASCII Pattern The ASCII Pattern Packet are 58 characters in length and have a sequence number at the beginning of each string, starting at 000, incrementing to 999 and wrapping around to 000 again.
Random Binary Pattern Random Binary Pattern is 16 characters in length and contains random binary data. 4.4.11 PING TEST From the Programmer Window, Select Utilities – Ping Test. The PING Test is used to simulate a Host/Remote polling environment. The Master sends out a packet to the Remote and the Remote replies to the Master with the same packet information.
ASCII Pattern The packets will be 52 characters in length. The pattern used to build the packets will have the following format (in ASCII): ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz --ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ASCII Number Pattern The packets will be 48 characters in length.
Start Begins the Ping Test. Stop Stops the Ping Test. Save Offers the user the option to save the information received from the test. Close Closes the Ping Test window. 4.4.12 ASCII/HEX TERMINAL The ASCII and Hex Terminal Screens are accessed from the Utilities pull-down menu and allow the user to select an ASCII, Hexadecimal TCP Socket or UDP Socket Terminal Screen for the Primary and Secondary COM Ports (configured in the Port Settings screen - see Section 4.4.
Secondary The Secondary ASCII Terminal screen allows the user to send and receive ASCII data on the Secondary COM Port (set up in the Port Settings screen). TCP Socket The TCP Socket Terminal screen allows the user to send and receive ASCII data over a TCP connection. UDP Socket The UDP Socket Terminal screen allows the user to send and receive ASCII data over a UDP connection. 4.4.12.2 HEX TERMINAL From the Programmer Window, Select Utilities – Hex Terminal. Hex Terminal configurations are defined below.
TCP Socket The TCP Socket Terminal screen allows the user to send and receive Hexadecimal data over a TCP connection. UDP Socket The UDP Socket Terminal screen allows the user to send and receive Hexadecimal data over a UDP connection. 4.5 PROGRAM CODE MENU The Program Code pull-down menu allows the user to update the Integra-TR firmware (*.
5 NETWORK OPTIMIZATION Detailed system engineering is beyond the scope of this manual. However, there are some simple tips that can be used to optimize performance of a radio based SCADA or telemetry system. 5.1 CHOOSE THE BEST PROTOCOL Some SCADA devices allow a choice of more than one operating protocol. In some cases, performance can be improved by selecting a different protocol. Contact Technical Service for assistance. 5.
Some representative performance values for 9600 b/s operation are given below. These values assume that the units are correctly aligned and installed in a quiet location. Environments with high electrical or RF noise levels will require an increase (less negative) in the numbers shown to achieve a given level of reliability. -100 dBm Approximately 50% reliability. Fading may cause frequent data loss. -90 dBm Approximately 90% reliability. Fading will cause occasional data loss.
6 DEFINITIONS Dribble bits Extraneous bits delivered at the end of a data transmission. These bits are equivalent to a “squelch tail” in voice systems. COM Port The Communications Port of the wireless device. This port is configured as DCE and is designed to connect directly to DTE. CTS Clear to Send. An RS-232 output signal from Integra-TR indicating that it is ready to accept data (used in RTS mode). DCE Data Communications Equipment. This designation is applied to equipment such as modems.
ABOUT CALAMP CalAmp is a leading provider of wireless communications products that enable anytime/anywhere access to critical information, data and entertainment content. With comprehensive capabilities ranging from product design and development through volume production, CalAmp delivers cost-effective high quality solutions to a broad array of customers and end markets. CalAmp is the leading supplier of Direct Broadcast Satellite (DBS) outdoor customer premise equipment to the U.S.
