User manual

001-5099-000 HiPR-900 User Manual
85
8. Specifications
These specifications are subject to change without notice.
GENERAL
Product HiPR-900
Frequency
902- 928 MHz ISM band
Configurations IP Bridge, IP Router
Management HTTP embedded web server for setup and help
Supported Protocols Ethernet IEEE 802.3 (Any protocol running over IP such as ICMP, IGMP, TCP,
UDP,IPSec, SNTP etc.)
IP Fragmentation
Address Resolution Protocol (ARP)
IP directed broadcast
IP limited broadcast
IP multicast relay
DHCP Client and Server
Network Address Translation (NAT)
Dynamic Routing (RIPv2)
Channels 51
Occupied Bandwidth 490kHz
Operating Temperature -30° to + 60° C
Humidity 95% at 40° C non-condensing
Supply voltage
10 - 30 VDC maximum or IEEE 802.3af Power-Over-Ethernet (PoE)
Typical Rx Current Drain at 25
°
C
(Master mode)
Power Out DC Input 12V DC Input 10V DC Input 30V PoE input
30 dBm (1W) 405 mA 485 mA 170 mA 105 mA
20 dBm (.1W) 360 mA 430 mA 155 mA 095 mA
Typical Tx Current Drain at 25
°
C
Power Out DC Input 12V DC Input 10V DC Input 30V PoE input
30 dBm (1W) 715 mA 845 mA 290 mA 180 mA
20 dBm (.1W) 445 mA 535 mA 190 mA 120 mA
Cold start 1 8 seconds (typical)
Nominal Dimensions 5.50" W x 1.81" H x 4.25" D (13.97 x 4.6 x 10.8 cm)
Shipping Weight 2.26 lbs. (1.028 Kg)
Mounting Options Flat surface, DIN-rail option
TRANSMITTER
TX Frequencies
902.5 – 927.5 MHz
Mode Frequency-hopping spread-spectrum (FHSS)
TX Power Out User adjustable from 20 dB to 30 dB in 0.1 dB increments
Frequency Tolerance ±1.0 PPM
RECEIVER
RX Frequencies
902.5 – 927.5 MHz
Bit Error Rate (BER) -98dBm for 10x10
-6
@ 512kb/s (in Parallel Decode, typical)
-102dBm for 10x10
-6
@ 256kb/s (in Parallel Decode, typical)
[phone] [e-mail] www.dataradio.ru
ООО "ДатаРадио" - официальный представитель в Роcсии