User manual

001-5099-000 HiPR-900 User Manual
76
6.7.7.3 Neighbor Management (Advanced)
The neighbor table can be also populated with user-defined entries. The interface presented below allows
the user to add static entries.
Figure 83 - Neighbor Management
Item Description
Compulsory Information
Node ID: Unit's RF MAC address (factory default)
Node Name: Unit's name as configured in Setup (Basic)→ General →
Station Name
RF IP Address: Unit's RF interface IP address
RF Mask: Unit's RF interface IP netmask
Ethernet IP Address: Unit's Ethernet interface IP address
Ethernet Mask: Unit's Ethernet interface IP netmask
Optional Information
Attribute: Unit's attributes (NAT | PROXY | AP (Access Point) | RP (Relay
Point) | Master | Repeater |Remote)
Primary Route Hop Count: Amount of hops to reach this unit taking the
primary route
Primary Route Next Hop ID: The RF MAC address of the 1-hop neighbor
taking the primary route
Backup Route Hop Count: The number of hops to reach this unit taking
the backup route
Backup Route Next Hop ID: The RF MAC address of the 1-hop neighbor
taking the backup route
[phone] [e-mail] www.dataradio.ru
ООО "ДатаРадио" - официальный представитель в Роcсии