User manual

001-5099-000 HiPR-900 User Manual
68
6.7.5 Statistics
6.7.5.1 Interfaces
The LAN (Ethernet) Interface layer shows reception and transmission traffic counts.
The RF Interfaces indicates the result of the RF link performance.
Note: All definitions given below use the following convention:
RX (or Input) = data received from a lower network layer
TX (or Output) = data transmitted to a lower network layer
Figure 73 - Statistics –Interfaces
Item Description
LAN – RX Pkts The total number of packets received by Ethernet interface.
LAN – TX Pkts The total number of packets transmitted by Ethernet interface.
RF OIP sublayer – RX Pkts The total number of input packets received by RF-OIP interface.
RF OIP sublayer – TX Pkts The total number of output packets transmitted by RF-OIP interface.
RF Airlink sublayer – RX Pkts The total number of packets transmitted by the RF Airlink sublayer.
RF Airlink sublayer – TX Pkts The total number of packets received by the RF Airlink sublayer.
Note: For Transport (TCP/UDP) and Network (IP) interface layers statistics refer to MIB 1213.
See Section 6.7.3.3.1.2 for details.
[phone] [e-mail] www.dataradio.ru
ООО "ДатаРадио" - официальный представитель в Роcсии