User manual

001-5099-000 HiPR-900 User Manual
63
6.7.3.8 Ethernet (PHY)
Figure 66 - Advanced IP Configuration – Ethernet (PHY)
Item Description
PHY Bitrate
Auto Negotiate
Force to 100 Mbps
Force to 10 Mbps (Default)
PHY Duplex
Half Duplex (read-only field)
6.7.3.9 RF Link
Figure 67 - Advanced IP Configuration – RF Link
Item Description
TDD Mode
Disabled, Enabled (Default) –
Normally used in a point- to- point network carrying Ethernet traffic. Maximizes RF link effi-
ciency for carrying two-way traffic
Note: This parameter can only be set for the Master Unit. Repeater and Remote units will
only display the Master's setting.
Timed Preset
Segments
Enabled/Disabled (default)
While TDD provides the best performance in point to point and point-to-multipoint configu-
rations, please enable "Timed Preset Segments" for networks with a repeater in order to
avoid RF collisions. . See section 6.7.3.9.1 for more
[phone] [e-mail] www.dataradio.ru
ООО "ДатаРадио" - официальный представитель в Роcсии