User manual

001-5099-000 HiPR-900 User Manual
42
6.7.3.2 RF (IP)
Figure 38 - Advanced IP Configuration - RF (IP)
Item Description
RF MAC Unit’s RF MAC address
RF IP Address
Displays factory-assigned address: nnn.nnn.nnn.nnn “Factory”
Entering 0.0.0.0 sets the RF IP Address to the factory default and high-
lights the “Factory” name (active address)
Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the
factory default and highlights the “Override” name (active address)
RF Net Mask Set to valid common IP netmask for all units within a HiPR network
RF MTU
Default 1500. Range 100 to 1500 bytes. Entering a value lower than 1500
may reduce system performance.
Note:
Normally the parameters on this page are not changed except for RF MTU.
[phone] [e-mail] www.dataradio.ru
ООО "ДатаРадио" - официальный представитель в Роcсии