User manual

001-5099-000 HiPR-900 User Manual
11
4. Browser-Based Interface
A built-in web server makes configuration and status monitoring possible from any browser-equipped
computer, either locally or remotely. Status, configuration, and online help are available without requiring
special client software. Setup is password-protected to avoid tampering or unauthorized changes.
Both the configuration parameters and operating firmware can be updated remotely, even over the RF
network itself, using the standard File Transfer Protocol (FTP).
Figure 5 - Web Interface
4.1 Interface Setup and Status
The HiPR-900 user interface is used to configure and view your network settings. Figure 5 shows the
welcome screen of the Web Interface. The screen is subdivided in two frames: the frame on the left allows
the user to navigate through the menus, while the main frame on the right displays the selected page. The
menu system is two-leveled; some of the top-level menus expand to offer submenus. The Site Map link
can be found right below the menus on the navigator pane. Help is available for each page displayed in
the main frame. It can be accessed at all times by clicking the Help icon. The remaining buttons on the
bottom of the Navigator frame are used to save your configurations and reset the unit. Refer to section 6
for details on HiPR-900 user interface operation and configuration.
Navigator Frame
Main Frame
[phone] [e-mail] www.dataradio.ru
ООО "ДатаРадио" - официальный представитель в Роcсии