Specifications

39
SET AIN2
MA, V
MA:
0 (0%) Î 4 MA
10000 (100%) Î 20 MA
V:
0 (0%) Î 0 V
10000 (100%) Î 5 V
(NOTE: FOR 0-5V INPUT, REMOVE JP2)
MA
SET ADCONST A/D CONVERTER CONSTANT 1 - FACTORY USE ONLY
1000
SET ADSHIFT
0, 1, 2, 3, 4, 5, 6
A/D CONVERTER CONSTANT 2 - FACTORY USE ONLY
6
SET EXPC
0, 1, 2, 3, 4
SPECIFIES THE EXPONENTIAL MULTIPLIER FOR THE REGISTERS
CONTAINING THE COMPOUND METER TOTAL AND METER 1 AND 2
SCALED TOTALS.
USE CAUTION WHEN MODIFYING THIS PARAMETER. INTEGER
OVERFLOW IS POSSIBLE IF AN ILL-CHOSEN PARAMETER IS USED.
3
AUX I/O SETUP SELECTIONS DEFAULTS
SET LCD01
AUTO, ON, OFF
CONTROLS LCD DISPLAY OF METER #1 TOTALIZATION.
AUTO:
DISPLAY ACTIVE WHEN METER #1 DETECTED.
ON:
DISPLAY ACTIVE, REGARDLESS OF WHETHER METER 1 DETECTED.
OFF:
SUPPRESSES DISPLAY.
NOTE: FOR CONVENIENCE, ALL
LCD SCREENS ARE SEQUENTIALLY
DISPLAYED RIGHT AFTER POWERUP AND RIGHT AFTER SWITCHING
FROM SETUP MODE TO RUN MODE (DIP SWITCH #1).
AUTO
SET LCD02
AUTO, ON, OFF
CONTROLS LCD DISPLAY OF METER #2 TOTALIZATION.
AUTO:
DISPLAY ACTIVE WHEN METER #2 DETECTED.
ON:
DISPLAY ACTIVE, REGARDLESS OF WHETHER METER #2 DETECTED.
OFF:
SUPPRESSES DISPLAY.
AUTO
SET LCD03
AUTO, ON, OFF
CONTROLS LCD DISPLAY OF METER #1 FLOW RATE.
AUTO:
DISPLAY ACTIVE WHEN METER #1 DETECTED.
ON:
DISPLAY ACTIVE, REGARDLESS OF WHETHER METER #1 DETECTED.
OFF:
SUPPRESSES DISPLAY.
AUTO
SET LCD04
AUTO, ON, OFF
CONTROLS LCD DISPLAY OF METER #2 FLOW RATE.
AUTO:
DISPLAY ACTIVE WHEN METER #2 DETECTED.
ON:
DISPLAY ACTIVE, REGARDLESS OF WHETHER METER #2 DETECTED.
OFF:
SUPPRESSES DISPLAY.
AUTO