User manual

Figure 13 Guardian Programmer Window
Guardian programming is through the PC’s Primary COM Port. Primary and secondary COM ports are configured with
the Field Programming Software. The programming cable (included in the Demo Kit) is connected from the Setup Port
on the Guardian to the PC’s COM port configured as the Primary Port.
5.3 PORT SETTINGS
The Port Settings window of the Field Programming Software is accessed by selecting Port Settings from the Utilities
menu of the main Guardian Programmer window (above). Tabbed panels in the Port Settings window (see the
following figure) are used to configure the PC’s serial COM ports. COM port assignments are displayed in the status bar
at the bottom of the main Guardian Programmer window.
Figure 14 Port Settings Window
Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3 | Page 23