User manual

120 20131-301 Gemini G3 - User Manual

5. Verify the integrity of the newly transferred files.

a) Connect to the mobile’s IP address using an Internet browser such as IE (5.0 or later) or Mozilla.

b) Enter the user name and password (in the usual manner) and allow the Welcome page to

load.

c) In the left pane, click on Unit Status. The Unit Identification and Status pane should display

the newly upgraded firmware in its Banner (should correspond to the upgrade package version)

and the H/W Status should also show Ok.

d) In the left pane, click on Maintenance, then on Package Control. Wait a few moments for the

results to display. Figure 52 shows a “Pass” result indication.

Figure 56 - Sample FTP program

5.5.1.1 File Integrity Failure

If the message in the result screen points out that file(s) failed the integrity check, retry the FTP transfer

for the failed files(s) again.

If the problem persists, please have the Package Control result screen indications handy and contact Da-

taradio system engineering for assistance.