User manual

120 20131-301 GeminiG3 - User Manual
14
Table 2 - G3 LEDs indications
G3 LEDs indications
Power-on Sequence (LEDs are paired)
PWR / PGM RX / TX Indication
Off
Off Off GeminiG3 Off
Solid Red Off Boot in progress
Blinking Red on Black
(3 short red)
Off RAM or Self Test Error
Boot 1
Blinking Red on Black
(Long / Short reds)
Off
Unable to proceed to next boot
step
Solid Amber Off Boot in progress
Blinking Amber on Black
(Short amber blink)
Off
Exception error
(Reboot in 10 secs)
Boot 2
Blinking Red on Amber
(Short red blink)
Off Unable to complete boot process
Power ON (LEDs are paired)
PWR / PGM RX / TX Indication
Solid Red
TXON
in progress (in test mode)
Blinking
Green on Black
(1/2 sec each)
Flashing Green on Black Rx packet (in test mode)
Special
Solid Amber Solid Amber Test jumpers installed
Normal Operation (LEDs are independent)
PWR /
PGM
Indication RX / TX Indication
Solid Amber Roaming
Green Normal state
Flashing Green Rx packet
Flashing Red Tx packet Blinking
Amber on
Green
GPS 1 pps
Flashing
Amber
MPE Throttled (Still Tx, Still Rx)
Normal
Amber MPE Exceeded (No Tx, Still Rx)
Note:
Blinking refers to the LEDs turning ON and OFF based on time (such as number of times per second)
Flashing refers to the LEDs turning ON and OFF in response to an event occurring (such as packets)