User manual

120 20131-301 GeminiG3 - User Manual
10
• In installations equipped with a “ChargeGuard”, connect to the controlled-side of the Char-
geGuard (remembering that the DC Power lead must NOT be switched).
10. Make appropriate connections.
Cautions:
Where scraping to bare metal was required, and at the battery posts where wire ends and
lugs may be exposed, apply anti-corrosion compound.
Insert the fuse only when installation is complete and ready to test.
11. At the GeminiG3 radiomodem’s position, neatly coil cable slack and attach securely.
2.5 Antenna
The main transmitter antenna must be vehicle-mounted to provide a separation distance of 50 cm or
more from all persons and the antenna gain must not exceed 5dBi (with a 1.6dB cable loss).
2.5.1 Recommended tools and supplies
• Circle cutter, hole saw or socket punch for antenna
• Appropriate crimping tool for type of connection present on the radiomodem unit