User manual

001-0003-832 Rev3
Page 54 of 59
S
S
E
E
C
C
T
T
I
I
O
O
N
N
1
1
8
8
–
–
S
S
P
P
E
E
C
C
I
I
F
F
I
I
C
C
A
A
T
T
I
I
O
O
N
N
S
S
Product specifications are subject to change without notice.
General Specifications
Interface Connectors: RS-232 DE-9S Connector (DCE)
10/100 Base-T Full Duplex
USB Host Controller
Power Connector I/O
Power Connector: Molex Micro-Fit, 4 pin, PN:43045-0400
LED Indicators: SVC-TYPE, TX/RX, DCD, RSSI
Antenna Interface: SMA female
Size: 5.60 x 3.11 x 1.71 in.
Weight: 9.0 oz.
Power Input: 9.0 – 28VDC 1.8 W; 150 mA @ 12 VDC (average idle)
9.0 – 28VDC 4.7 W; 390 mA @ 12 VDC (peak active 882-GPRS)
9.0 – 28VDC 7.5 W; 625 mA @ 12 VDC (peak active 882-EDGE)
9.0 – 28VDC 7.0 W; 590 mA @ 12 VDC (peak active 882-HSPA)
Input Pin: Drive with open collector or open drain, internal 18k ohm pull up
to 3.3VDC.
Output Pin: Open collector with series 0 ohm resistor as fuse.
Maximum TX Power: GSM: +33 dBm min. / +30 dBm min (1900MHz)
Rx Sensitivity: GSM: > -108 dBm typical, -102 dBm min.
Frequencies: Cellular: TX: 824-849 MHz Rx: 869-894 MHz
PCS: TX: 1850-1910 MHz Rx: 1930-1990 MHz
Temperature: Operating: -30°C to +75°C (-22° to 167°F) 100% Duty Cycle
Storage: -40°C to +85°C (-40° to 185°F)
Note: RF performance of the cell module may be limited above 60°C.
Emissions: FCC Part 15B
Transport Protocols: UDP/TCP
Command Protocol: Web interface, Command line v.250 AT, & proprietary
Certifications:
882-GPRS PTCRB Approved, Various Carrier Approvals
FCC ID: QIP-TC65
Industry Canada ID: IC: 267W-TC65
CE Approved
RoHS Compliant
882-EDGE PTCRB Approved, Various Carrier Approvals
FCC ID: QIP-MC75
Industry Canada ID: IC: 267W-MC75
CE Approved
RoHS Compliant
882-HSPA PTCRB Approved, Various Carrier Approvals
FCC ID: N7N-MC8781
Industry Canada ID: 2417C-MC8781
CE Approved
RoHS Compliant
NOTE: Power consumption while transmitting is dependent on the TX power level of the cellular module. The TX
power level of the module is controlled by the cellular base station.