Specifications

CellConnection

Page|17

Figure13DialSettings882‐HSPA

 AutoConnect:
WhensettoEnable,willallowthemodemtoautomaticallydialtheconnectionwhenthemodemispowered.
WhensettoDisable,themodemwillnotautomaticallydialtheconnectiontothecellularproviderandwill
not
attempttoautomaticallyre‐connectwhentheconnectionhasdropped.

 GSMBand(GPRS/EDGE)(ShowninFigure8):
SelectingUSAsetsthemodemtousethe850/1900MHzGSMband.SelectingEuropesetsthemodemtousethe
900/1800MHzGSMband.

 GSMBand(HSPA)(ShowninFigure9):
Thisoptionconfiguresthemodemtooperateononlytheselectedbands(asshownintheBandSelections).
CalAmprecommendleavingthisonALL.

― All:Allavailablebandswillbeaccessible,commonlycalledautoband(default)
― WCDMA2100:Usesthe2100MHzfrequencybandusedbytheUMTS/HSDPAnetworks
―
EGSM:Usesthe900/1800MHzEuropeanGSMfrequencyband
― ALLGSM:CanuseanyavailableGSMband.Europe(900/1800MHz)orUSA(850/1900MHz)
― ALLWCDMA:CanuseanyavailableWCDMAband,850/900/2100MHzinUMTS/HSDPAnetworks