User manual

001-0003-822 Rev 1
Page 39 of 48
DCD:
This sets the Data Carrier Detect to Always On, Connect On, or Always Off.
RI:
This sets the Ring Indicator to Always On, Incoming Ring, or Always Off.
Periodic Reset Timeout:
This sets the Periodic Reset Timeout from 0 to 65,535 ms.
Id:
This sets an alphanumerical Identifier for the serial connection.
PAD Settings
Incoming Friendly IP Address:
This sets the IP address of the device using the PAD functionality.
Port:
This sets the port number used for forwarding requests to the serial port.
Local Encoding:
Select buttons to Enable or Disable local encoding of the data packet.
PAD Mode:
Select buttons to set the PAD mode of the modem as a Server or Client. Server mode is commonly
selected when the modem is providing the interface via the RS232 port.
Pad Protocol:
This sets the data protocol for the PAD to tcp or udp data.